A lot of equipment will use the saw blade of the circular saw, through which the product can quickly complete some processing work, so that it will not affect the normal operation of the enterprise. However, when using the saw blade of the circular saw machine, some unstable elements will occur, and many employees will be very troubled, so let's talk about the factors that cause the instability of the saw blade of the circular saw machine and the solutions:
A. Wave sawing:
1. The cause of the problem: the side of the sawtooth edge jumps greatly; the solution: check the condition of the circular saw machine and regrind the circular saw blade
2. The cause of the problem: the thickness of the sawtooth varies; the solution: check and correct the amount of saw material
3. The cause of the problem: the serrated edge becomes dull and polluted; the treatment method: clean and grind the serrated part
4. Cause of the problem: the backing is not parallel to the feeding direction; solution: check the backing and proofread
5. Cause of the problem: the cutting speed is too low; solution: increase the diameter of the circular saw blade or increase the speed
6. Cause of the problem: improper fit; solution: check the fit and roll from the beginning
B. Cracks at the bottom of the tooth (about the saw blade of the carpenter circular saw):
1. Cause of the problem: The wooden bridge board of the workbench is too thick, and the sawdust is not discharged. Solution: Replace the bridge board
2. Cause of the problem: the thickness of the splitter is small; solution: increase the thickness of the splitter
3. Cause of the problem: the tooth chamber is too small; solution: increase the area and space of the tooth chamber. If the problem occurs on the equipment, it is necessary to know what is the cause, and what kind of treatment method can be used together to solve the problem in time. will have an impact.
There are many metal circular sawing machine manufacturers on the market now, and different equipments deal with the problem differently, so it shows that no matter what, the appropriate method should be adopted to deal with such a problem.
