Cermet +PVD Coating, Special Heat Treatment and Tension Press More Stable and Better Cutting Surface. The carbide was designed for cutting to metals clearly outlast conventional carbide.

Our special brazing technology leads to a higher braze joint strength and therefore teeth are firmly attached to the plate to prevent carbide breakage.

High sawing accuracy can be achieved thanks to our high quality products, which is distortion free and uniform thickness of material.

Due to originally developed coating, our cold sawblades provide the longest lifetime and stable performance for the maximum productivity and the lowest cost per cut.

Diameter	Thickness		Central Hole	Numberof Teeth	Cutting Range		Carbon steel<750N/m2	Alloy carbon steel>1050n/m2	High-strengthsteel>1050N/m2	Stainlesss teel	Brass/copper
Diameter	BladeThickness	Body Thickness	Central Hole	Numberof Teeth	Minimum Diameter	Maximum Diameter	Carbon steel<750N/m2	Alloy carbon steel>1050n/m2	High-strengthsteel>1050N/m2	Stainlesss teel	Brass/copper
250	1.40	1.20	32	50	30	60					●
	2.00	1.70	32	54	30	60	●	●	●	●
	1.40	1.20	32	60	25	50					●
	2.00	1.70	32	60	25	50	●	●	●	●
	1.40	1.20	32	72	25	45					●
	2.00	1.70	32	72	25	45	●	●	●	●
	2.00	1.70	32	80	20	40	●	●	●	●
	2.00	1.70	32	100	15	30	●	●	●	●
285	2.00	1.7/1.75	32/40	54	35	75	●	●	●	●
	2.00	1.7/1.75	32/40	60	35	70	●	●	●	●
	2.00	1.7/1.75	32/40	72	30	60	●	●	●	●
	2.00	1.7/1.75	32/40	80	25	55	●	●	●	●
	2.00	1.7/1.75	32/40	100	20	45	●	●	●	●
	2.00	1.7/1.75	32/40	120	20	35	●	●	●	●
315	2.20	1.90	32/40	60	70	70	●	●	●	●
	2.50	2.25	32	60	70	70	●	●	●	●
	1.60	1.30	32	64	65	65					●
	1.60	1.30	32	72	60	60					●
	2.20	1.90	32/40	72	60	60	●	●	●	●
	2.50	2.25	32	72	60	60	●	●	●	●
	2.20	1.90	32/40	80	50	50	●	●	●	●
	2.50	2.25	32	80	50	50	●	●	●	●
	1.60	1.30	32	80	50	50					●
	2.20	1.90	32/40	100	40	40	●	●	●	●
	2.50	2.25	32	100	40	40	●	●	●	●
360	2.60	2.27/2.30	32/40/50	50	100	100	●	●	●	●
	2.60	2.27/2.30	32/40/50	60	100	100	●	●	●	●
	2.60	2.27/2.30	32/40/50	72	80	80	●	●	●	●
	2.60	2.27/2.30	32/40/50	80	70	70	●	●	●	●
	2.60	2.27/2.30	32/40/50	100	55	55	●	●	●	●
	2.60	2.27/2.30	32/40/50	120	40	40
425	2.60	2.27	50	50	60	120		●	●	●
	2.60	2.27	50	60	55	110		●	●	●
	2.60	2.27	50	80	40	80		●	●	●
	2.60	2.27	50	90	35	70		●	●	●
	2.60	2.27/2.30	50	100	30	65		●	●	●
460	2.70	2.27	40/50	40	80	150		●	●	●
	2.70	2.27	40/50	50	70	135		●	●	●
	2.70	2.27	40/50	60	65	120		●	●	●
	2.70	2.27	40/50	72	55	100		●	●	●
	2.70	2.27	40/50	80	50	80		●	●	●
	2.70	2.27	40/50	100	35	60		●	●	●
	2.70	2.27	40/50	120	30	55		●	●	●

For cutting mild and high carbon steel, bearing steel
The PVD coating is used for ordinary steel that is relatively hard, increases the service life by about 20%.

Metal cold cutting saw machine

PVD Cermet Circular Saw

You Might Also Like

Send Inquiry

Contact us if have any question